Basement Wall Panels Do It Yourself?
Owens Corning basement panels DIY may just be the cheapest option when it comes to the task of remodeling your basement. The cost of a home refurbishment can be massively reduced if you decide to take on the responsibility of doing the work on your own (assuming you already have the benefit of unused space and don’t need to engage in blasting or excavation, that is). On a cautionary note, however, problems have been reported regarding faulty client installation of Owens Corning basement panels DIY, so read through a few online tutorials first to determine whether you really possess the technical skill needed to embark a project of this nature.
Alternatively, you could hire contractors to install your Owens Corning basement panels. DIY, nonetheless, remains an easy option – odds are, even if you’re starting from scratch in terms of expertise, you’ll be able to finish the entire project in under two weeks. Owens Corning basement panels DIY installation can also be an ideal solution if you’re operating on a very low budget. In the Owens Corning system, prefabricated structural insulated panels (SIP) are used due to the fact that they are moisture and flame resistant, and have the ability to serve as thermal insulation. The attractive finish of the Owens Corning system makes it appropriate for any basement finishing project – the Owens look goes well in modern and traditional homes alike. The panels also have the nifty effect of absorbing sound, which both prevents noise from reverberating within the room and keeps it from disturbing people in the central living areas of your home.
Another great quality of this system is its capacity for damage resistance – Owens panels simply do not scratch! Additionally, as previously mentioned, the panels’ ability to resist the intrusion of damp makes it very unlikely you’ll need to replace one anytime soon.
Though they come with a great many benefits, Owens Corning basement wall panels can be quite expensive when contrasted with traditional drywall materials; this is why Owens Corning basement panels DIY installation is recommended, as an aid to reducing the overall cost of remodeling your basement. Indeed, the system has been specifically designed for DIY installation. The guiding rails provided with the prefab wall panels allow for the easy removal and replacement of wall panels, meaning that once the rails are in place, all you’ll need to do is slot sections in.
The Owens Corning basement panels DIY system consists of thick, rigid fiberglass panels with a polyeolfin covering on the interior side. Since Owens Corning invented fiberglass insulation, their knowledge is expertly applied in the creation of insulated walls that breathe, do not trap moisture and make rooms warm and quiet – a far cry, in technological terms, from the wood panels of yesteryear. With lumber and drywall finishes, a moisture-rich area such as a basement can become a health hazard. Owens Corning Basement Finishing System allows moisture to moisture pass through it, thus reducing the odds that growth of toxic mold will occur. .
The panel system and PVC framing that comes with the system can accommodate traditional wiring and panels, and can be easily removed to provide access to your foundation walls, plumbing or electrical fixtures. Panels are finished in attractive fabric and come in various trim options, including fabric, wood grain and white. The panels do not require additional insulation, drywall, taping or painting.
While this system is moisture resistant, note that it cannot be used as a moisture barrier for your entire basement. Water problems should be treated by the installation of proper insulating membranes before any attempt to install the Owens Corning basement panels DIY system is made.
